Duerkopp Adler 511 Operating Instructions Manual page 56

Cnc automat for bartacking seams and short seams

Hide thumbs Also See for 511:

Table of Contents

PWM output test

This testing function checks the function of the magnets.

–

Start test function with the "OK" key.

–

Select the desired output element by pressing the "ñ" or "ò" keys.

–

Switch the selected output element on and off by pressing the "OK"

key.

== PWM output test ==

Output Y31:

–

The present electricity, flowing through the clamping foot solenoid

will be displayed.

–

If the machine is equipped with a monitoring switch for the

clamping foot, the Output PWM-1 will have the value + or -,

according to the switching status of the output element.

–

Press the function key "ESC" in order to leave the testing function.

Caution – Risk of Injury !

Do not reach into the running machine during the functional test of the

output elements.

Output element

Y31

Also refer to the "Distributor PCB" section

Function

Clamping foot magnet

Table of Contents