Oil Lubrication - Duerkopp Adler 511 Operating Instructions Manual

10.2 Oil lubrication

Maintenance required
Lubricating the automatic
bartacker
3
Caution – Risk of Injury !
Oil can cause skin rashes.
Avoid prolonged skin contact.
If oil or grease contacts your skin, wash yourself thoroughly.
CAUTION !
The handling and disposal of mineral oils is subject to legal
constraints.
Deliver used oil to an authorized reception point.
Protect your environment.
Take care not to spill any oil.
Oil the automatic bartacker exclusively with the lubricating oil DA-10 or
equivalent oil with the following specification:
Viscosity at 40° C:
Flash point:
DA-10 can be purchased at sales branches of
DÜRKOPP ADLER AG, under the following part numbers:
250-ml container:
1-litre container:
2-litre container:
5-litre container:
Explanation
The automatic bartacker is equipped with
central oil wick lubrication. The bearings are
supplied by the oil reservoirs 2 and 3.
- The oil level must not drop below the red
marking of both reservoirs.
- Fill up oil though the drill-hole 1, up to the
red mark.
2
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
Operational interval, hours
1
8
89
1