3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual page 119

Amber
Status
SYSTEM
Meaning: Possible read-only memory corruption; cannot seek file.
Action: Reload the software. See Appendix F.
Amber
Status
SYSTEM
Meaning: The software image file has been deleted or the boot source
and image names do not match.
Action: Follow these steps:
1 At the monitor prompt, enter:
DF <path>
The default path is:
DF /primary
The image is called boot.ppc.
2 If the image has been deleted, reload the software using Appendix F.
3 If the image has a different name or is in a different directory, boot from
the image using:
BT [<path>]<filename>
Run
Fwd
Load
Amber
Test
Power
/Fault
Run
Fwd
Load
Amber
Test
Power
/Fault
Error LED Meanings 119