Adding User Accounts; Setting The Time And Date - 3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual

Adding User
Accounts
Setting the Time
and Date
You can add user accounts when logged in as "root" with Network
Manager privileges.
To add a user account, log on as root and use:
AddUser [<username>]
If you do not specify a username, you will be prompted for one. Specify
the privilege and password at the prompts.
Delete an account using:
DELeteUser [<username>]
To force a user password to expire, use:
EXPire [<username>]
To manage multiple users and see all user accounts, enter:
UserManage
Any user can change their password by entering:
PassWord
3Com recommends setting the time and date. Use:
SET -SYS DATE = <YYYY/MM/DD HH:MM[:ss]>
Enter the time in 24-hour-clock format. For example, to set the date and
time to January 10, 1996, 2:40 p.m., enter:
SET -SYS DATE = 1996/1/10 14:40
You can use the Network Time Protocol (NTP) service to synchronize the
computer clock in a distributed network.

Adding User Accounts

45