3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual page 155

###### Note: E1CHANx is short for E1, leased, CHANNelized, path #x
Add -SYS InstanceGroup E1CHAN1
Add -SYS InstanceGroup E1CHAN2
Add -SYS InstanceGroup E1CHAN3
Add -SYS InstanceGroup E1CHAN4
Add -SYS InstanceGroup E1CHAN5
Add -SYS InstanceGroup E1CHAN6
Add -SYS InstanceGroup E1CHAN7
Add -SYS InstanceGroup E1CHAN8
Add -SYS InstanceGroup E1CHAN9
Add -SYS InstanceGroup E1CHAN10 "!4A.10, !4B.10, !4C.10, !4D.10" PAth
Add -SYS InstanceGroup E1CHAN11 "!4A.11, !4B.11, !4C.11, !4D.11" PAth
Add -SYS InstanceGroup E1CHAN12 "!4A.12, !4B.12, !4C.12, !4D.12" PAth
Add -SYS InstanceGroup E1CHAN13 "!4A.13, !4B.13, !4C.13, !4D.13" PAth
Add -SYS InstanceGroup E1CHAN14 "!4A.14, !4B.14, !4C.14, !4D.14" PAth
Add -SYS InstanceGroup E1CHAN15 "!4A.15, !4B.15, !4C.15, !4D.15" PAth
Add -SYS InstanceGroup E1CHAN16 "!4A.16, !4B.16, !4C.16, !4D.16" PAth
Add -SYS InstanceGroup E1CHAN17 "!4A.17, !4B.17, !4C.17, !4D.17" PAth
Add -SYS InstanceGroup E1CHAN18 "!4A.18, !4B.18, !4C.18, !4D.18" PAth
Add -SYS InstanceGroup E1CHAN19 "!4A.19, !4B.19, !4C.19, !4D.19" PAth
Add -SYS InstanceGroup E1CHAN20 "!4A.20, !4B.20, !4C.20, !4D.20" PAth
Add -SYS InstanceGroup E1CHAN21 "!4A.21, !4B.21, !4C.21, !4D.21" PAth
Add -SYS InstanceGroup E1CHAN22 "!4A.22, !4B.22, !4C.22, !4D.22" PAth
Add -SYS InstanceGroup E1CHAN23 "!4A.23, !4B.23, !4C.23, !4D.23" PAth
Add -SYS InstanceGroup E1CHAN24 "!4A.24, !4B.24, !4C.24, !4D.24" PAth
Add -SYS InstanceGroup E1CHAN25 "!4A.25, !4B.25, !4C.25, !4D.25" PAth
Add -SYS InstanceGroup E1CHAN26 "!4A.26, !4B.26, !4C.26, !4D.26" PAth
Add -SYS InstanceGroup E1CHAN27 "!4A.27, !4B.27, !4C.27, !4D.27" PAth
Add -SYS InstanceGroup E1CHAN28 "!4A.28, !4B.28, !4C.28, !4D.28" PAth
Add -SYS InstanceGroup E1CHAN29 "!4A.29, !4B.29, !4C.29, !4D.29" PAth
Add -SYS InstanceGroup E1CHAN30 "!4A.30, !4B.30, !4C.30, !4D.30" PAth
Add -SYS InstanceGroup E1CHAN31 "!4A.31, !4B.31, !4C.31, !4D.31" PAth
# Add Instance Group to cover all paths on each UltraWAN connector:
###### Note: E1CHAN4x is short for E1, leased, CHANnelized, all paths on 4x
Add -SYS InstanceGroup E1CHAN4A "!4A.1 - !4A.31" PAth
Add -SYS InstanceGroup E1CHAN4B "!4B.1 - !4B.31" PAth
Add -SYS InstanceGroup E1CHAN4C "!4C.1 - !4C.31" PAth
Add -SYS InstanceGroup E1CHAN4D "!4D.1 - !4D.31" PAth
# Path-level path parameter configuration
# The following parameters may need to be changed from their default
# settings, based on your specific environment topology:
#
# ChannelMap: This parameter specifies the timeslots (i.e. channels)
# associated with each specific path.
" !4A.1, !4B.1, !4C.1,
" !4A.2, !4B.2, !4C.2,
" !4A.3, !4B.3, !4C.3,
" !4A.4, !4B.4, !4C.4,
" !4A.5, !4B.5, !4C.5,
" !4A.6, !4B.6, !4C.6,
" !4A.7, !4B.7, !4C.7,
" !4A.8, !4B.8, !4C.8,
" !4A.9, !4B.9, !4C.9,
Example Configuration Templates
!4D.1" PAth
!4D.2" PAth
!4D.3" PAth
!4D.4" PAth
!4D.5" PAth
!4D.6" PAth
!4D.7" PAth
!4D.8" PAth
!4D.9" PAth
Default setting is
155