3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual page 122

122 A E: T
PPENDIX ROUBLESHOOTING
then on again to retry the system software load. If the load is
unsuccessful, see Appendix F to reload the system software.
Amber
Status
SYSTEM
Meaning: No response from the TFTP server to Address Resolution
Protocol (ARP) request. The TFTP server is not present or may
be incorrectly configured.
Action: Check the TFTP server configuration and verify the MAC
address of the PathBuilder switch. Turn the power off and
then on again to retry the system software load. If the load is
unsuccessful, contact your network supplier for assistance.
Amber
Status
SYSTEM
Meaning: No response to TFTP request. The TFTP server is not present,
the incorrect file was downloaded, or the file is incorrectly
configured.
Action: Make sure the MAC address is initialized correctly. Turn the
power off and then on again to retry the system software
load. If the load is unsuccessful, contact your network
supplier for assistance.
Run
Fwd
Load
Amber
Test
Power
/Fault
Run
Fwd
Load
Amber
Test
Power
/Fault