Mounting The Switch; Environmental Requirements; Mounting Kit - 3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual

26 C 2: I
HAPTER NSTALLING THE
Mounting the
Switch
Environmental
Requirements

Mounting Kit

H
ARDWARE
You can mount your switch on a tabletop, stack several switches with
brackets, or mount the switch in a rack.
Table 7 provides the environmental requirements of the PathBuilder
switch.
Table 7 Environmental Requirements
Parameter
Temperature
Operating
Nonoperating
Altitude
Operating
Nonoperating
Relative Humidity
Operating
Nonoperating
The mounting kit contains the hardware shown in Figure 9.
Figure 9 Mounting Kit Contents
Two brackets
Four 8-32 Phillips
flathead screws for use
when stacking bridge/routers
Minimum Requirement
5 °C
-40 °C
10% noncondensing
10% noncondensing
Four adhesive-backed
rubber feet
Maximum Requirement
40 °C
75 °C
15,000 ft
40,000 ft
90% noncondensing
90% noncondensing