3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual page 162

162 A G: C
PPENDIX OMPLETING
ADD !T1CHAN23 -PA ChannelMap 23
ADD !T1CHAN24 -PA ChannelMap 24
#
# ChannelBaud: This parameter specifies the baud rate (56K or 64K) of
# each timeslot (i.e. channel) mapped to the
# specified path.
# This setting can be changed to CB56K (56kbits/sec) for
# leased-line paths that require 56kbit/sec operation
#
# Some examples on changing the ChannelBaud parameter setting are:
#
# SETDefault !T1CHAN13 -PAth ChannelBaud = CB56K
# SETDefault !T1CHAN4A -PAth ChannelBaud = CB56K
# Enable all the paths
SETDefault !4A.1-!4D.24 -PAth Control = Enable
T U -WAN C
HE LTRA ONFIGURATION
Default setting is CB64K (64kbits/sec).