AT&T MERLIN LEGEND Release 3.0 Installation Manual page 563

Backing Up with a Memory Card
Card Removed after Confirmation
Memory Card Restore
RESTORE IS CANCELED.
System is DOWN.
The memory card was removed from the processor slot while the restore
was in progress. The restore is aborted and the system performs a System
Erase (frigid start). You must reinsert the memory card and repeat the
restore procedure.
Wrong System Programming Port
Console Display/Instructions
Restore n :
Change Sys Programming
Port to Extension xxxx
before Restoring.
Exit
The system programming port is not set to the same system programming
port as that set in the backup file. The restore is aborted. Use the Inspect
feature to view the port of the file on the card. Change the system
programming port to match the port shown on the card (see "System
Programming Position Assignment" in System Programming, or System
Programming Summary) and repeat the restore procedure.
Additional Information PC
n = filename selected
xxxx = system programming port
extension
Maintenance and Troubleshooting D–23