AT&T MERLIN LEGEND Release 3.0 Installation Manual page 501

Conclusion of Hardware Maintenance
2 Hold the top cover with the hooks facing you.
3 Engage the tabs at the rear of the top cover with the carrier.
4 Lower the top cover, so that the legs lock into the vents on the module.
Installing the Front Cover
To install the front cover, see Figure 5-2 and follow these steps.
1
Hook the top of the front cover onto the top cover.
Push down on the bottom of the front cover until it locks securely on the
2
base of the wire manager on the modules.
Central Office Problems 5-31