AT&T MERLIN LEGEND Release 3.0 Installation Manual page 565

Backing Up with a Memory Card
If the restore fails because the card is damaged, the system performs a
System Erase (frigid start). Repeat the restore procedure using a different
file and/or memory card.
Wrong Type of Card
Memory Card Restore:
Inserted Memory Card is
not the correct type.
Remove and insert MERLIN
LEGEND Backup/Restore
Card.
Exit
The inserted card does not match the card option selected from the
System menu. Remove the card and repeat the restore procedure with the
correct type of card. See "Card Types" for information about the card
labels.
Board Mismatch
Console Display/Instructions
Restore x:
Restore Failure
RESTORE IS CANCELED.
Board mismatch between
control unit and file.
Exit
A mismatch exists between the hardware components present on the
current system and the hardware components reflected in the backup file,
The restore is aborted. You can do one of the following:
Repeat the restore procedure with another file.
Modify the system hardware to match the configuration of the
backup file and repeat the restore procedure with the same file.
Additional Information
x = filename selected
Maintenance and Troubleshooting D-25
PC