AT&T MERLIN LEGEND Release 3.0 Installation Manual page 416

Module Problems
Busy-Out
Summary
Console Procedure
PC Procedure
Appropriate Modules
Time Estimate
To busy-out a module, follow the steps below.
Console Display/Instructions
1 From the Maintenance menu, select the Slot option.
Maintenance
Make a selection
System
Slot
Port
Exit
2 Specify the slot number (n=00 to 17)
Slot:
Enter Slot number (00-17)
nn
Backspace
Exit
4-38 Control Unit Problems
Menu → Maintenance → Slot → Dial the slot no. →
Enter → Busy-Out → Yes.
(F6) → (F2) → Type the slot no. → (F10) → (F2) → (F1)
Any module that you are about to test
Once all calls are terminated, the busy-out
completes in less than 1 second. If calls in progress
take too long, ask the callers to hang up.
Enter
Additional Information
Dial or type [ nn ], then select
P C
(F2)
Enter.