AT&T MERLIN LEGEND Release 3.0 Installation Manual page 499

Checking Ports
Console Display/Instructions
2 Select the B-Channel option.
Port:
Make a Selection
Line/Trunk
Station
RS232 Port1
RS232 Port2
Exit
3 Specify the slot and port number (ss= 2-digit
number).
B-Channel
Enter B-Channel (sspp)
xxxx
Exit
4 Select Audit Call.
BChannel xxxx:
Make a selection
Audit Line
Audit Call
Exit
The screen below appears only if the audit message is successfully created
and sent.
BChannel xxxx Audit Call
Audit Initiated
Exit
Modem
B-Channel
Enter
Enter
Additional Information
slot number; pp= 2-digit port
Dial or type [ sspp ] and select
xxxx = slot and port number entered
in Step 3.
xxxx =
slot and port number entered
in Step 3.
Central Office Problems 5–29
PC
(F7)
Enter.
(F2)