Using Spm - AT&T MERLIN LEGEND Release 3.0 Installation Manual

\Using SPM

Using SPM
For more information on using SPM, see System Programming and
Maintenance.
Starting SPM
The procedure for accessing SPM differs slightly, depending on whether your
PC is connected directly or by modem to the control unit.
With a Direct Local Connection
To access SPM when your PC is connected directly to the control unit, follow
the steps below.
If you do not have a hard drive, insert the SPM diskette into Drive A and
1
switch to Drive A if it is not already the current drive.
2 Start the SPM program.
Type The SPM Welcome screen appears, as shown below.
SPM.
Console Display/Instructions
Press any key.
3
Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue:
Version X.xx
4 Select an option by pressing one of the function keys.
SPM Main Menu
Menu: Select Function
Sys Program
(F1)
(F2) Backup
(F3)
Boards
(F4)
Print Opts
(F5)
Monitor
1-8 Introduction
(F6)
Maintenance
(F7)
Restore
(F8)
Pass-Thru
(F9)
Password
(F10)
Language
Additional Information
If the main menu (see Step 4) does
not appear, or if the information on
the screen is garbled, press any key
again.
PC