Power Supply - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

2-Port Gigabit Synchronous Ethernet SPA Overview
2-Port Gigabit Synchronous Ethernet SPA hardware supports IEEE1588v2, either as a client or server.
The 2-Port Gigabit Synchronous Ethernet SPA has these hardware capabilities to support the 1588v2
protocol stack:
•
•
Note
Table 3-34
Table 3-34 Interface Specification for 2-Port Gigabit Synchronous Ethernet SPA
Specification
Synchronous Ethernet support
Interface Type and Density
Local Timing Interfaces
Local Timing Frequency
BITS Interface Support
SSM Support
IEEE 1588v2
NTPv4

Power Supply

The 2-Gigabit Synchronous Ethernet SPA extracts 18.854 watts maximum. The actual Lab
measurements at room temperature result in only around 10.5 watts maximum.
Standards Compliance
The 2-Port Gigabit Synchronous Ethernet SPA complies with these standard specifications:
•
•
•
•
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-60
Classification and forwarding of 1588v2 protocol packets.
Hardware time stamping.
The 2-Port Gigabit Synchronous Ethernet SPA hardware is the same for all configurations of the
product.
describes key interface specifications on the 2-Port Gigabit Synchronous Ethernet SPA.
ITU-T G.8261 (2008) specifications for SyncE support on ethernet interfaces.
ITU-T G.8262 (OPTIONS 1 AND 2) for platform timing support and performance.
IETF TICTOC telecom profile support for performance.
ITU-T G.8261, G.8262, G.823, G.824, G.825, O.171, and O.172 for clock jitter and wander
specifications.
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
Description
Yes
2x1 GE
Input; Output
1.544 MHz / 2.048 MHz
In; Out
Yes
Yes
Yes
OL-5052-14