1-Port 10-Gigabit Ethernet Spa Overview; 1-Port 10-Gigabit Ethernet Spa Leds; Xfp Port Cabling Specifications - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
Figure 3-44
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–

1-Port 10-Gigabit Ethernet SPA Overview

The following sections describe the 1-Port 10-Gigabit Ethernet SPA:
•
•
•
•
•
•

1-Port 10-Gigabit Ethernet SPA LEDs

The 1-Port 10-Gigabit Ethernet SPA has two types of LEDs. There is an ACTIVE/LINK LED for the
port and the Status LED as shown in
Figure 3-45
1
The 1-Port 10-Gigabit Ethernet SPA LEDs are described in
OL-5052-14
Crossover Cable Pinout, RJ-45 Connections Between Routers
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–
1-Port 10-Gigabit Ethernet SPA LEDs, page 3-51
1-Port 10-Gigabit Ethernet SPA Cables and Connectors, page 3-52
XFP Connections, page 3-52
XFP Port Cabling Specifications, page 3-53
XFP Optical Transmit and Receive Specifications, page 3-53
XFP Module Ordering Information, page 3-54
1-Port 10-Gigabit Ethernet SPA Faceplate
1
Active/Link LED
Figure 3-45.
2 STATUS LED
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
1-Port 10-Gigabit Ethernet SPA Overview
SPA-1X10GE-L-V2
Table 3-25.
2
3-51