1-Port Channelized OC-3 STM1 ATM CEoP SPA Overview
Table 3-43
LED Label
The Cisco 12000 SIP-401, Cisco 12000 SIP-501, and Cisco 12000 SIP-601 do not support the IPSec
Caution
VPN SPA (SPA-IPSEC-2G). Installing a IPSec VPN SPA in these carrier cards could damage the guide
rails.
1-Port Channelized OC-3 STM1 ATM CEoP SPA Overview
The following sections describe the 1-Port Channelized OC-3 STM1 ATM CEoP SPA:
•
•
•
1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs
The 1-Port Channelized OC-3 STM1 ATM CEoP SPA has three types of LEDs. There are two LEDs for
the port on the SPA, and one STATUS LED as shown in the following figure.
Figure 3-53
1
2
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-72
IPSec VPN SPA LED (continued)
Color
Amber
Green
1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs
1-Port Channelized OC-3 STM1 ATM CEoP SPA Interface Specifications
1-Port Channelized OC-3 STM1 ATM CEoP SPA Optical Transceiver Modules and Cables
1-Port Channelized OC-3 STM1 ATM CEoP SPA Faceplate
1
2
C/A (Carrier/Alarm) LED
A/L (Active Loopback) LED
Chapter 3
Overview: Cisco 7600 Series Router Shared Port Adapters
State
Meaning
On
SPA is on and good, and the SPA is being configured.
On
SPA is ready and operational.
3
STATUS LED
3
LASER
1
CLASS
SPA-1CHOC3-
SPA-1CHOC3-CE-ATM
CE-ATM
47-18493-XX REVXX
VID: XXXXXXX
CSA: XXXXXXX
OL-5052-14
Need help?
Do you have a question about the 7600 SIP 200 - SPA Interface Processor 200 and is the answer not in the manual?
Questions and answers