Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual page 102

2-Port Gigabit Ethernet SPA Overview
SFP modules exist for technologies other than Gigabit Ethernet and for products other than the 2-Port
Gigabit Ethernet SPA. However, the information in this document pertains only to SFP modules that plug
into the 2-Port Gigabit Ethernet SPA ports.
The SFP module has a receiver port (RX) and a transmitter port (TX) that compose one optical interface.
Table 3-30
Note Because the SPA-2X1GE-V2 has two native copper connectors, it does not support the SFP-GE-T.
Table 3-30
SFP Module
Product Number
SFP-GE-S
SFP-GE-L
SFP-GE-Z
SFP-GE-T
Table 3-31
Specification
Wavelength
Cabling distance
(maximum)
Operating temperature range
Storage temperature range
Supply Voltage range
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-56
and Table 3-31 provide SFP module information and specifications.
SFP Module Options
SFP Module
Short wavelength
(1000BASE-SX)
Long wavelength/long haul
(1000BASE-LX/LH)
Extended distance
(1000BASE-ZX)
Gigabit Ethernet SFP
module—1000BASE-T
SFP Module Specifications
Description
SFP-GE-S: 770–860 nm
SFP-GE-L: 1270–1355 nm
SFP-GE-Z: 1500–1580 nm
SFP-GE-T: N/A
SFP-GE-S: 500 m on 50/125um MMF. 300 m on 62.5/125um MMF.
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-T: 328 ft. (100 m)
SFP-GE-S:–5 to 85 degrees C
SFP-GE-L:–5 to 85 degrees C
SFP-GE-Z: –5 to 85 degrees C
SFP-GE-T: 0 to 70 degrees C
SFP-GE-S: –40 to 85 degrees C
SFP-GE-L: –40 to 85 degrees C
SFP-GE-Z: –40 to 85 degrees C
SFP-GE-T: –40 to 85 degrees C
SFP-GE-S: 3.1 to 3.5 V
SFP-GE-L: 3.1 to 3.5 V
SFP-GE-Z: 3.1 to 3.5 V
SFP-GE-T: 3.1 to 3.5 V
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
Description
Contains a Class 1 laser of 850 nm for
1000BASE-SX (short wavelength) applications.
Contains a Class 1 laser of 1310 nm for
1000BASE-LX/LH (long wavelength)
applications.
Contains a Class 1 laser of 1550 nm for
1000BASE-ZX (extended wavelength)
applications.
1000BASE-T SFP Transceiver Module for
Category 5 copper wire
OL-5052-14