4-Port And 8-Port Fast Ethernet Spa Overview; 4-Port And 8-Port Fast Ethernet Spa Leds - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
1

4-Port and 8-Port Fast Ethernet SPA Overview

The following sections describe the 4-Port and 8-Port Fast Ethernet SPA:
•
•

4-Port and 8-Port Fast Ethernet SPA LEDs

The 4-Port and 8-Port Fast Ethernet SPA has two types of LEDs. There is a Port Number LED for each
individual port and one Status LED. The 8-Port FastEthernet SPA is shown in
Figure 3-41
1
The 8-Port FastEthernet SPA LEDs are described in
Table 3-23
LED Label
Port Number
Active/Link
(0, 1, 2, 3, 4, 5, 6
or 7)
STATUS
1. In this case, port number refers to the numbered LEDs on the 8-Port FastEthernet SPA (0, 1, 2, 3, 4, 5, 6 or 7). Each LED
OL-5052-14
Long length RPR mate cable for single port
RPR SPAs (CBL-RPR-OC192-L)
4-Port and 8-Port Fast Ethernet SPA LEDs, page 3-49
Cables, Connectors, and Pinouts, page 3-50
8-Port FastEthernet SPA Faceplate
1
A/L
Active/Link LED
8-Port FastEthernet SPA LEDs
Color
Green
Amber
Off
1
Green
Amber
Off
number on the 8-Port FastEthernet SPA references a port on the SPA.
2
A/L A/L A/L
2
Table
State Meaning
On The port is enabled and the link is up.
On The port is enabled and the link is down.
Off The port is disabled.
On The SPA is online.
On The SPA is receiving power and bootstrapping.
Off The SPA is offline and deactivated.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
4-Port and 8-Port Fast Ethernet SPA Overview
Short length RPR mate cable for single port
RPR SPAs (CAB-RPR-OC192-S)
Figure
A/L A/L A/L
STATUS LED
3-23.
3-41.
2
A/L
3-49