1-Port 10-Gigabit Ethernet Spa Cables And Connectors; Xfp Connections - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

1-Port 10-Gigabit Ethernet SPA Overview
Table 3-25
LED Label
Active/Link
STATUS

1-Port 10-Gigabit Ethernet SPA Cables and Connectors

The XFP module is an I/O device that provide a hot-swappable optical interface to the 1-Port 10-Gigabit
Ethernet SPA. The following XFP modules are supported:
•
•
•

XFP Connections

XFP modules (see
UPC connectors are supported. Patch cords with APC connectors are not supported.
Cisco Multirate 10GE XFP modules do not support Digital Optical Monitoring (DOM).
The operating temperature range for the XFP modules is 0 to 70°C (32 to 158°F); storage temperature
range is -40°C to +85°C (-40°F to +185°F).
The maximum power consumption per Cisco XFP module is 3.5W.
See the label on the XFP for technology type and model.
XFP dimensions are:
•
•
•
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-52
1-Port 10-Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Amber
Green
Cisco Multirate 10GBASE-LR and OC-192/STM-64 SR-1 XFP Module for SMF—This multirate
XFP supports both 10GBASE-LR Ethernet applications and OC-192/STM-64 short-reach (SR-1)
POS applications.
Cisco Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP Module for SMF—This multirate
XFP supports both 10GBASE-ER Ethernet applications and OC-192/STM-64 intermediate reach
(IR-2) POS applications.
Cisco Multirate 10GBASE-ZR and OC-192/STM-64 LR-2 XFP Module for SMF—This multirate
XFP supports both 10GBASE-ZR Ethernet applications and OC-192/STM-64 long-reach long reach
(LR-2) POS applications.
Figure 3-46) provide one dual LC/PC fiber connector. Only connectors having PC or
Height 12.5 mm
Width 18.35 mm
Length 71.1mm
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
State Meaning
Off Port is not enabled by software.
On Port is enabled by software and the link is up.
On Port is enabled by software and the link is down.
Off SPA power is off.
On SPA power is on and good, and SPA is being configured.
On SPA is ready and operational.
OL-5052-14