1-Port Channelized Oc-3 Stm1 Atm Ceop Spa Interface Specifications; 1-Port Channelized Oc-3 Stm1 Atm Ceop Spa Optical Transeiver Modules And Cables; 24-Port Channelized T1/E1 Atm Ceop Spa Overview - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
The 1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs are described in the following table.
Table 3-44
LED Label
C/A
A/L
STATUS

1-Port Channelized OC-3 STM1 ATM CEoP SPA Interface Specifications

The physical layer interface for the 1-Port Channelized OC-3 STM1 ATM CEoP SPA is Optical Carrier-3
(OC-3). The 1-Port Channelized OC-3 STM1 ATM CEoP SPA provides one 155.52-Mbps OC-3 network
interface for all supported platforms.
The single SPA port accepts an SFP module with a duplex LC-type receptacle that allows connection to
optical fiber.
1-Port Channelized OC-3 STM1 ATM CEoP SPA Optical Transeiver Modules and
Cables
Cisco Systems qualifies the optics that are approved for use with its SPAs. The 1-Port Channelized OC-3
STM1 ATM CEoP SPA supports the following types of optical transceiver modules:
•
•
•
•
•

24-Port Channelized T1/E1 ATM CEoP SPA Overview

The following sections describe the 24-Port Channelized T1/E1 ATM CEoP SPA:
•
•
•
OL-5052-14
1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Off
Amber
Green
Multimode (MM) SFP module—SFP-OC3-MM
Short Reach (SR) SFP module—SFP-OC3-SR
Intermediate Reach (IR) SFP module (15 km)—SFP-OC3-IR1
Long Reach (LR) SFP module (40 km)—SFP-OC3-LR1
Long Reach 2 (LR2) SFP module (80 km)—SFP-OC3-LR2
24-Port Channelized T1/E1 ATM CEoP SPA LEDs
24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications
24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors
State Meaning
Off Port is not enabled by software.
On Port is enabled by software.
On Port is enabled by software, and there is at least one alarm.
Off Port is not enabled by software.
On Port is enabled by software, loopback is off.
On Port is enabled by software, loopback is on.
Off SPA power is off.
On SPA power is on and good, and SPA is being configured.
On SPA is ready and operational.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
24-Port Channelized T1/E1 ATM CEoP SPA Overview
3-73