24-Port Channelized T1/E1 Atm Ceop Spa Patch Panel; 2-Port Channelized T3/E3 Atm Ceop Spa; 2-Port Channelized T3/E3 Atm Ceop Spa Leds - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
•

24-Port Channelized T1/E1 ATM CEoP SPA Patch Panel

The recommended patch panel is part number DCC2484/25T1S from SMP Data Communications
(http://www.smpdata.com).
To order the patch panel, contact the Sales and Marketing Support staff at SMP Data Communications:
•
•
•
For product support for the patch panel, contact Cisco Engineering Support at SMP Data Communications:
•
•
•
2-Port Channelized T3/E3 ATM CEoP SPA Overview
The following sections describe the 2-Port Channelized T3/E3 ATM CEoP SPA:
•
•
•

2-Port Channelized T3/E3 ATM CEoP SPA LEDs

The 2-Port Channelized T3/E3 ATM CEoP SPA has three types of LEDs, as shown in the following
figure. There are two LEDs for each port on the SPA, and a single STATUS LED for the SPA.
Figure 3-57
OL-5052-14
If both CEoP SPAs are connected to their patch panels in a different configuration (TX to Transmit
and RX to Receive on one SPA, and TX to Receive and RX to Transmit on the other SPA), use a
T1 straight-through cable (standard RJ-45 patch cable) between the patch panels.
800-880-7674 (toll free in the U.S.A.)
828-298-2260 (outside the U.S.A.)
ciscoinfo@smpdata.com
800-880-7674 (toll free in the U.S.A.)
828-298-2260 (outside the U.S.A.)
ciscoeng@smpdata.com (email)
2-Port Channelized T3/E3 ATM CEoP SPA LEDs
2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications
2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors
2-Port Channelized T3/E3 ATM CEoP SPA Faceplate
3
1 2
(email)
4
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
2-Port Channelized T3/E3 ATM CEoP SPA Overview
SPA-2CHT3-CE-ATM
5
3-79