Cisco EPC3925 User Manual

Guidelines for starting the wifi
Additional
10-digit customer number:
information
User name:
WiFi network's name (SSID):
POP server (e-mails): pop3.upcmail.hu
Transfer speed may be affected by interference of other wireless devices nearby, as well as physical features of the
site of installation. These may cause connection speed to slow down, which is independent of the Provider. If you
used an external router before to transmit signal, then you will no longer need it.
In order to have the fastest internet connection possible, please use cable connection between the WLAN modem
and your computer.
You can make further settings on the following web-based user interface:
Cisco 3925
• IP address: http://192.168.1.1
• Please leave the user name and the password blank.
Wifi modem
parts
The password and the network ID (SSID) can be
found on the label on the bottom of the modem.
1 2
Windows 8
3
EJMNNGBY
tel.: 1221 | www.upc.hu/ugyfelszolgalat | facebook.com/upcmagyarorszag
Install date:
Password:
WiFi password:
SMTP server (e-mails): smtp.upcmail.hu
Technicolor TC7200 /Ubee EVW3226
• IP address:
- in router mode (default) 192.168.0.1
- in bridge mode: 192.168.100.1
• User name/Login: admin
• Password: admin
1 2
Power DS US Online Eth. Wireless Phone
C I S C O
POWER DS US ONLINE TEL1
ON TELEPHONE
The password and the network ID (SSID) can be
found on the label on the bottom of the modem.
POWER 1 2 USB
OFF
TEL1 TEL2 ETH1 ETH2 ETH3 ETH4
1: Click on the icon you can see in the
illustration
2: Select the modem from the menu „Wireless
network connection". You can identify the
modem based on the SSID (e.g. UPC
123456) that you can find on the label on
the bottom of the modem. Click „Connect".
4
3: Type in the security key that you can find on
the label on the bottom of the modem, next
to the sign. Important! Upper/lower case
sensitive. Click „OK".
4: You have successfully connected to UPC
Internet.
Guidelines for starting the wifi
Windows 7
Windows XP
EPC3925
TEL2 WLAN WP-S
3 4
SETUP
WIRELESS
1 2 CABLE SETUP
ETHERNET RF RESET ON OFF
P
U O
S W
B E
R
MAC OS X
1 2
4
3
1
2
3
4
1 2
3
4
tel.: 1221 | www.upc.hu/ugyfelszolgalat |
1: Click on the icon you can see in the
illustration
2: Select the modem from the menu „Wireless
network connection". You can identify the
modem based on the SSID (e.g. UPC
123456) that you can find on the label on
the bottom of the modem. Click „Connect".
3: Type in the security key that you can find on
the label on the bottom of the modem, next
to the sign. Important! Upper/lower case
sensitive. Click „OK".
4: You have successfully connected to UPC
Internet.
1: Click on the icon you can see in the
illustration
2: Select the modem from the menu „Wireless
network connection". You can identify the
modem based on the SSID (e.g. UPC
123456) that you can find on the label on
the bottom of the modem. Click „Connect".
3: Type in the security key that you can find on
the label on the bottom of the modem, next
to the sign. Important! Upper/lower case
sensitive. Click „OK".
4: You have successfully connected to UPC
Internet.
1: Click on the icon in the upper part of your
screen, then choose „Turn Airport On"
2: Select the modem from the menu „Wireless
network connection". You can identify the
modem based on the SSID (e.g. UPC
123456) that you can find on the label on
the bottom of the modem. Click „Connect".
3: Type in the security key that you can find on
the label on the bottom of the modem, next
to the sign. Important! Upper/lower case
sensitive. Click „OK".
4: You have successfully connected to UPC
Internet.
facebook.com/upcmagyarorszag