Sip, Ssc, And Spa Compatibility - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

Chapter 1 SIP and SPA Product Overview
Figure 1-2
•
•
•

SIP, SSC, and SPA Compatibility

The following tables show SIP and SPA compatibility by SPA technology area on the Cisco 7600 series
router.
For more information about the introduction of support for different SIPs and SPAs, refer to the "Release
Note
History" sections in the overview chapters of the Cisco 7600 Series Router SIP, SSC, and SPA Software
Configuration Guide.
OL-5052-14
Horizontal and Vertical Chassis Slot Orientation for SPAs
Front of SIP, horizontal chassis slots
SPA 0
SPA 2
SPA 0
Double-height SPA
SPA 0
SPA 2 Double-height SPA
Each SPA provides a certain number of connectors, or ports, that are the interfaces to one or more
networks. These interfaces can be individually configured using the Cisco IOS command-line
interface (CLI).
Either a blank filler plate or a functional SPA should reside in every subslot of an SIP during normal
operation to maintain cooling integrity. Blank filler plates are available in single-height form only.
SPAs support online insertion and removal (OIR). They can be inserted or removed independently
from the SIP. SIPs also support online insertion and removal (OIR) with SPAs inserted in their
subslots.
SPA 1
SPA 3
SPA 1
SPA 3
SPA 1
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
SIP, SSC, and SPA Compatibility
Vertical slot orientation
1-3