Spa Installation And Removal - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

SPA Installation and Removal

Figure 6-1
SPA Installation and Removal
This section provides step-by-step instructions for installing and removing a SPA in a SIP.
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
Warning
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Figure 6-2
Figure 6-2
76 00 -S
IP -40 0
SP A IN
TE RF AC
PR OC E
ES SO R
1
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
6-2
Handling a SPA
Metal carrier
Printed circuit board
illustrates how to install and remove a SPA in a SIP.
SPA Installation and Removal
1
VP A- OC
19 2 PO
S- SR
2
SIP
Chapter 6 Installing and Removing a Shared Port Adapter
2 SPA
OL-5052-14