1-Port Oc-48C/Stm-16 Pos Spa Leds - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

1-Port OC-48c/STM-16 POS SPA Overview

1-Port OC-48c/STM-16 POS SPA LEDs

The 1-Port OC-48c/STM-16 POS SPA has six LEDs, as shown in
Figure 3-27
1
2
3
4
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only.
Note
The 1-Port OC-48c/STM-16 POS SPA LEDs are described in
Table 3-16
LED Label
WRAP
PASSTHRU
MATESYNC
C/A
A/L
CARRIER
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-32
1-Port OC-48c/STM-16 POS SPA Faceplate
1 3
2
WRAP LED
PASSTHRU LED
MATESYNC LED
C/A (Carrier/Alarm) LED
1-Port OC-48c/STM-16 POS SPA LEDs
Color State
Off Off
Green On
Amber On
Off Off
Amber On
Off Off
Green On
Off Off
Green On
Amber On
Off Off
Green On
Amber On
Off Off
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
5
4
6
7
5 CARRIER LED
6 ACTIVE LED
7 A/L (Active Loopback) LED
8 STATUS LED
Table
Meaning
Port is not in wrap mode.
Port is in wrap mode somewhere on the ring.
Port is in wrap mode locally.
Port is not in pass-thru mode.
Port is in pass-thru mode.
Mate port is not synchronized.
Mate port is synchronized.
Port is not enabled by software.
Port is enabled by software.
Port is enabled by software, and there is at least one alarm.
Port is not enabled by software.
Port is enabled by software, loopback is off.
Port is enabled by software, loopback is on.
Port is not enabled by software.
Figure 3-27.
SPA-1XOC48POS/RPR
SPA-1XOC12-POS
8
3-16.
OL-5052-14