Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual page 12

Organization
Table 1
12.2(33)SRA
12.2(18)SXF2
12.2(18)SXF
12.2(18)SXE2
12.2(18)SXE
Organization
This document contains the following chapters:
Chapter
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
xii
Document Revision History
OL-5052-05 June 2006
OL-5052-04 January
2006
OL-5052-03 September
2005
OL-5052-02 June 2005
OL-5052-01 April 2005
Title
SIP and SPA Product Overview
Overview: Cisco 7600 Series SIPs
Overview: Cisco 7600 Series
Router Shared Port Adapters
Preparing to Install a SIP or a
Shared Port Adapter
Installing and Removing a SIP
Installing and Removing a Shared
Port Adapter
Troubleshooting the Installation
Added support for 1-Port OC-48c/STM-16
POS SPA, 1-Port Channelized STM-1/OC-3
SPA , 4-Port and 8-Port Fast Ethernet SPA, and
2-Port and 4-Port OC-48c/STM-16 POS SPA.
Added support for 1-Port OC-192c/STM-64
POS/RPR VSR Optics SPA.
Added support for Cisco 7600 SIP-600, 1-Port
OC-192c/STM-64 POS/RPR SPA, 1-Port
OC-48c/STM-16 ATM SPA, 1-Port 10-Gigabit
Ethernet SPA, 5-Port Gigabit Ethernet SPA,
2-Port Gigabit Ethernet SPA and 1-Port
OC-48c/STM-16 ATM SPA, and 1-Port
OC-192c/STM-64 POS/RPR XFP SPA.
Added support for IPSec VPN SPA, and
Cisco 7600 SSC-400.
First release.
Description
Provides an introduction to SPA interface
processors (SIPs) and shared port adapters (SPAs).
Provides a SIP/SPA compatibility summary. For
each supported SIP, provides a summary of SIP
characteristics and a SIP overview.
For each supported SPA, provides a summary of
SPA characteristics and a SPA overview.
Describes the required tools, equipment, and safety
guidelines for installing SIPs and SPAs
Describes the procedures for installing and
removing a SIP on a Cisco 7600 series router.
Describes the procedures for installing and
removing a SPA on a Cisco 7600 series router. It
also describes how to verify the SIP and SPA
installation.
Provides information for troubleshooting the
installation of SIPs and SPAs. It also describes
helpful debug commands and error messages.
Preface
OL-5052-14