5-Port Gigabit Ethernet Spa Leds; 5-Port Gigabit Ethernet Spa Cables, Connectors, And Pinouts; Sfp Connections - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

7600 series sip, ssc, and spa hardware installation guide
Table of Contents

Advertisement

5-Port Gigabit Ethernet SPA Overview

5-Port Gigabit Ethernet SPA LEDs

The 5-Port Gigabit Ethernet SPA has two types of LEDs. There is an A/L LED for the port and one Status
LED as shown in
Figure 3-50
1
The 5-Port Gigabit Ethernet SPA LEDs are described in
Table 3-35
LED Label
Active/Link
STATUS

5-Port Gigabit Ethernet SPA Cables, Connectors, and Pinouts

The interface connectors on the 5-Port Gigabit Ethernet SPA are five individual fiber optic receivers that
support SFPs. Each port can send and receive traffic using the optical fiber connections.
The interface connectors on the 5-Port Gigabit Ethernet SPA are five individual fiber optic receivers that
support SFPs. Each port can send and receive traffic using the optical fiber connections.

SFP Connections

The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit
Ethernet optical slots on the 5-Port Gigabit Ethernet SPA, linking the port with a 1000BASE-X
fiber-optic network.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-62
Figure
3-50.
5-Port Gigabit Ethernet SPA Faceplate
1
A/L LED
5-Port Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Amber
Green
Chapter 3
Overview: Cisco 7600 Series Router Shared Port Adapters
2
STATUS LED
Table
State
Meaning
Off
Port is not enabled.
On
The port is enabled and the link is up.
On
The port is enabled and the link is down.
Off
SPA power is off.
On
SPA power is on and good, and SPA is being configured.
On
SPA is ready and operational.
3-35.
2
OL-5052-14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7600 sip-600Cisco 7600 ssc-4007600 sip-2007600 sip-400

Table of Contents