10-Port Gigabit Ethernet Spa Overview; 10-Port Gigabit Ethernet Spa Leds - Cisco 7600 SIP 200 - SPA Interface Processor 200 Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters

10-Port Gigabit Ethernet SPA Overview

The following sections describe the 10-Port Gigabit Ethernet SPA:
•
•
•
•
•
•

10-Port Gigabit Ethernet SPA LEDs

The 10-Port Gigabit Ethernet SPA has two types of LEDs. There is an A/L LED for the port and one
Status LED as shown in
Figure 3-51
1
The 10-Port Gigabit Ethernet SPA LEDs are described in
Table 3-39
LED Label
Active/Link
STATUS
OL-5052-14
10-Port Gigabit Ethernet SPA LEDs, page 3-67
SFP-GE-S Modules, page 3-69
SFP-GE-L Modules, page 3-69
SFP-GE-Z Modules, page 3-69
SFP-GE-T Modules, page 3-70
SFP Module Cabling and Connection Equipment, page 3-65
Figure
10-Port Gigabit Ethernet SPA Faceplate
A/L LED
10-Port Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Amber
Green
3-51.
2 STATUS LED
State Meaning
Off Port is not enabled.
On The port is enabled and the link is up.
On The port is enabled and the link is down.
Off SPA power is off.
On SPA power is on and good, and SPA is being configured.
On SPA is ready and operational.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
10-Port Gigabit Ethernet SPA Overview
Table 3-39.
3-67