Reset Hub To Factory Default - HP 10Base-T Hub 24M Manual

Reset Hub to Factory
Default
Attribute
Screen Name
Menu
Function
Common Use
Browser Interface Window
Browser Interface Tab
Default Setting
Factory resets remove any configuration changes performed on the device
after it has been removed from its original packaging. This includes all IP
address configurations. Consequently, the device management functions will
be reachable only if you have configured the device via Bootp or DHCP
servers.
Description

Reset Hub to Factory Default

Hub Configuration
Reinitializes the hub's configuration.
Correcting a corrupted hub that was altered by a computer
virus, network bottlenecking, a power failure, and other
irregular activities.
Facrory Reset
Diagnostics
None
Configuration Reference
6-87