Igmp Filter Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual
Hp 1:10gb ethernet bl-c switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
- Command reference manual (208 pages) ,
- Application manual (195 pages) ,
- Cli reference manual (190 pages)
Table of Contents
Advertisement
IGMP Filter Configuration
To display the following form, go to the IGMP Filters Configuration form. Select a Filter ID, or open the
IGMP Filters folder and click Add Filter.
The following table describes the IGMP Filter Configuration controls:
IGMP Filter Configuration controls
Table 146
Control
Filter Identifier (1 - 16)
Enabled?
Range 1 IP Multicast Address
Range 2 IP Multicast Address
Action
Description
Selects an IGMP filter to configure.
Enables or disables this IGMP filter.
Configures the start of the range of IP multicast addresses for this filter.
Configures the end of the range of IP multicast addresses for this filter.
Allows or denies multicast traffic for the IP multicast address range specified.
Configuring the switch
208
Advertisement
Table of Contents
