Variable Colour Balance (Yellow, Magenta, Cyan, Black) - Xerox DocuColor 12 System Administration Manual

1
These options allow you to adjust the default
levels of all four process colours (Yellow, Magenta,
Cyan, and Black) for areas of high, medium, and
low density on the copies.
Three higher settings, three lower settings, and
the normal (medium) settings are available for
each density level of each colour, as illustrated in
2
Figure 25.
You can adjust each density level and each colour
independently in any combination.
KEY POINT: Remember that adjusting the
amount of any of the process colours affects the
complementary colours that use that colour.
3
4
5
6
7
TOOLS MODE
Variable Colour Balance
(Yellow, Magenta, Cyan, Black)
Figure 25: Sample Colour Balance screen
3–18 DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE