G
G
Basic Features
G If the optional offset catch tray is
installed, each set is offset from the
previous copy. This means that the
edge of each set is placed to the left
or right of the previous copy set to
allow easy separation.
G For paper sizes which are valid for
offset, see Offset Catch Tray
(Optional) of Appendix A
Specifications .
G For Collated option, you can select
Face Up for output orientation and
the collated sets will be delivered
4
face up. For details, refer to System
Setup of 6-1 List of Custom Preset
Functions .
70
4-7 Collating Copy Output (Output/Finishing)
Collating Copy Output
You can choose to output multiple sets of the copies in three ways:
G Collated/Finishing
The copies are sorted according to their page sequence and the
specified number of sets are delivered facing downwards.
G Uncollated (per page)
The copies are sorted by page according to the copy sequence and the
specified number of sets are delivered facing upwards.
G Auto
The required number of collated sets is output if you load your originals
into the DADF and press Start.
(Output/Finishing)