Setting Up Postscript Printing With Windows Nt 4.0; Installing The Postscript Printer Driver For Windows Nt 4.0 - Xerox DocuColor 3535 Installation Manual

1
1-14 Installing User Software on a Windows Computer
B
EFORE YOU BEGIN
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing.
For more information, see the
3. Specify the printing destination on your computer.
T IPP
O SET UP PRINTING WITH
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers windows, click the Fiery icon and choose Properties from the
File menu.
3. Click the Details tab and click Add Port.
The Add Port dialog box appears.
4. Enter the network path for the printer.
The path for the printer is the IP address or the DNS name, followed by
by the Fiery connection you want to print to (
between the elements, for example,
5. Click OK.

Setting up PostScript printing with Windows NT 4.0

To set up the Fiery as a PostScript printer, you must install the PostScript printer driver
for Windows NT 4.0 and the corresponding printer description files. You must also
configure the print connection between the computer and the Fiery. If you are printing
over a network, you must configure a network connection.

Installing the PostScript printer driver for Windows NT 4.0

The following procedures describe the installation of a local printer. Adding a printer
to a local system requires that you log in to your local Windows NT 4.0 computer
(not the network server domain) and that you are a member of the Administrators
group. The procedure for adding a network printer is similar to adding a port. See
"Completing the Windows NT 4.0 TCP/IP and LPR connection"
Configuration Guide.
W 9 /M
INDOWS X E
http://10.10.10.150/ipp/print
ipp
print , hold , or direct ). Insert slashes
.
on page 1-20.
, and then