Tray Capabilities; Loading Paper In Tray 5 (Bypass) - Xerox EC70 User Manual

Paper and Media
7. If you have changed the media type, select an option on the Control Panel touch screen:
• To choose paper size, type, or color, touch Paper Supply.
• To choose a specific paper stock, touch Paper Catalog.
8. Touch Save and Confirm.
9. If you have not changed the media type, to retain the previous settings, touch Cancel.
L L o o a a d d i i n n g g P P a a p p e e r r i i n n T T r r a a y y 5 5 ( ( B B y y p p a a s s s s ) )
Use the bypass tray for various media types and custom sizes. It is intended primarily for small
quantity jobs using special media. The bypass tray is on the left-hand side of the printer. A tray
extension is provided to accommodate larger paper. After loading paper in the bypass tray, ensure
that the tray settings on the touch screen match the paper size and type loaded.

Tray Capabilities

• Tray 5 can hold up to 250 sheets of 90 g/m
• Tray 5 can accept paper from 64–300 g/m
• Tray 5 can accommodate paper sizes from SRA3, (4 x 6–13.2 x 19.2 in.).
To load paper in Tray 5 (Bypass Tray):
Note: Do not load paper or media above the maximum fill line.
1. Open Tray 5 and pull out the extension tray for larger sizes. If already opened, remove any paper
that is a different size or type.
2. Move the width guides to the edges of the tray.
3. Insert the paper either long-edge or short-edge first, face up. Larger paper sizes can be fed only
short-edge first. Load punched paper with holes to the right. Load labels and transparencies face
up with top edge towards the front of the tray.
98 Xerox ® EC70 Color Copier/Printer
User Guide
2 paper.
.
2