Scan To Ftp/Smb Setup; Prerequisite - Xerox CopyCentre C123 Scan Manual

S c a n t o F T P / S M B
S c a n t o F T P / S M B
Files can be scanned on the M123/M128 device and routed on to a server or a client using FTP or SMB protocol. Directory structures (repositories)
need to be created on the server to hold the scanned documents. It is assumed that an FTP server/client or an SMB server/client exists and is
configured on the network.

Prerequisite

Complete the Network Installation. Refer to
Complete DNS/WINS set up if Host names are provided for the mail servers, rather than IP addresses. Refer to

Scan to FTP/SMB Setup

Field Name Description
Enable Port by which TCP/IP client
"TCP/IP" Port" communicates with the
TCP/IP server
Enable "FTP Port by which FTP client
Client" Port communicates to the FTP
server
Enable "SMB Port by which SMB client
Port" communicates to the SMB
server
Page 21 of 28
S e t u p
S e t u p
General Network Setup
Location
WUI:
Properties
LUI:
System Settings
Network Settings
WUI:
Properties
LUI:
System Settings
Network Settings
WUI:
Properties
LUI:
Scan
To
FTP
R
Port Settings
System Settings
Port Settings
R
Port Settings
System Settings
Port Settings
NR
Port Settings
Advanced Network Setup
Scan To Value
SMB
R
NR
R
701P42081