4
Starting and Configuring the Router
You can use only the console port to make initial configuration of the A6602.
Setting Up the Configuration Environment
Connecting the Router to a Configuration Terminal
For how to connect the router to the configuration terminal, refer to "Connecting the Console
Cable" in Chapter 3 "Installing the Router".
Setting the Parameters for the Console Terminal
Step1
Create a HyperTerminal connection. Select Start > Programs > Accessories >
Communications > HyperTerminal, and enter a connection name in the Connection
Description dialog box, as shown below.
Figure 4-1 Create a connection
Step2
Select a connection port. Select a serial port from the Connect using drop-down list in the
Connect to dialog box, as shown below. Be sure to select the serial port to which the console
cable is actually connected.