HP D5970A - NetServer - LCII Installation Manual page 96

Chapter 7
Close and secure
processor cage
cover.
Figure 7-10. Closing the Processor Cage Cover
16. Replace the top cover on the chassis.
Refer to Chapter 3, "Opening and Closing the HP NetServer."
17. Reconnect the power cord.
18. Return the HP NetServer to normal operation.
NOTE
You are not required to use the HP NetServer Navigator
CD-ROM to reconfigure your system after installing the new
processor module. The HP NetServer detects the additional
processors automatically. However, HP recommends using the
HP NetServer Navigator CD-ROM to ensure you have the
latest drivers and information.
88
Installing Additional Processors