HP D5970A - NetServer - LCII Installation Manual page 116

Chapter 9
NOTE If you have a console switch box, refer to the switch box user
guide for instructions on connecting the keyboard, mouse, and
monitor.
The Keyboard and Mouse ports are PS/2 ports and are
interchangeable. You can plug the keyboard into the Mouse
port, if you want, or the mouse into the Keyboard port.
2. If you have an UPS (Uninterruptible Power Supply) installed in the rack,
turn it on.
3. Connect the serial cable (provided) between the UPS and the HP NetServer
as specified in the HP NetServer Rack Installation Road Map.
Refer to the user guide included with the UPS, and to the HP NetServer
Rack Installation Road Map, for additional information.
4. Connect the VGA monitor's power cord to AC power.
108
Connecting the Monitor, Keyboard, Mouse, and UPS