Attaching The Slides To The Rack - HP D5970A - NetServer - LCII Installation Manual

Chapter 13
Left
Front of
Rack
Attach nuts to this
face of left-front and
right-front rack columns.
Figure 13-2. Rack Nut Placement on Front Rack Columns
6. Repeat steps 2 through 5 for the other front rack column and attach rack
nuts to it.

Attaching the Slides to the Rack

This section provides the instructions for connecting the mounting slides to the
rack. The slides' mounting flanges are not used in the HP System Rack and must
be detached before fastening the mounting slides in the rack. Instead of the
flanges, the studs on the slide are inserted in holes on the inside face (the side) of
the rack columns.
1. Use a nut driver or wrench to detach the two mounting flanges from each
slide. See Figure 13-3.
Right
Alternative Rack Mounting
Seventeenth
Hole From
Bottom
Ninth Hole
From Bottom
Bottom of
NetServer
153