Obtaining Up-To-Date Configuration Details - HP D5970A - NetServer - LCII Installation Manual

Chapter 10
You can obtain the Release History and Status Report for your CD-ROM in one of
these ways:
Internet WWW--http://www.hp.com:80/netserver/support/news_main.html
Internet FTP--ftp://ftp.hp.com/pub/servers

Obtaining Up-to-Date Configuration Details

You can find up-to-date configuration information on the Navigator CD-ROM,
both in the Readme File and in Configuration Assistant. Use these sources to learn
about applicable compatibility issues and get the latest list of HP-tested
peripherals and accessories (see the Test Products List in Configuration Advisor).
Access the Readme File First
This file includes the most recent information that was not included in the printed
installation documentation. Follow these steps to view the file.
1. Press the power-on button.
2. Press the CD-ROM drive eject button.
3. Place the HP NetServer Navigator CD-ROM (L-Series) in the drive, and
press the *eject button again to close the drive.
NOTE *Using the low profile CD-ROM drive is slightly different than
full-height units. The disk drawer will spring out only part way
when you push the eject button. You must manually pull the
drawer open and manually close it after inserting a CD-ROM.
4. Turn the power off, wait 10 seconds, and turn the power on again.
5. If the system fails to boot, follow the diagnostic instructions on the screen.
6. Go to the HP Navigator main menu.
7. If the language of the Navigator screens needs to be changed, select User
Preferences and the desired language.
After setting the language with User Preferences, you can also change the
BIOS language by running the BIOS Flash Update utility found under HP
NetServer Utilities on the Navigator CD-ROM.
8. Select Readme File and read it carefully before beginning your
installation.
Configuring the HP NetServer
111