HP D5970A - NetServer - LCII Installation Manual page 164

Chapter 13
d. Tighten the nuts on both screws.
Figure 13-5. Securing the Slides to the Rack
10. Repeat Steps 1 through 9, and attach the other slide to the right-front and
right-rear rack columns.
WARNING With power supplies in place, the HP NetServer does not
balance evenly when lifted by its handles. Two people may
have difficulty holding the HP NetServer level enough to
fasten it to the slides. Removing the power supplies improves
the balance of the HP NetServer and reduces the likelihood of
accidents.
156
Anti-tip Foot
Alternative Rack Mounting