HP D5970A - NetServer - LCII Installation Manual page 170

Chapter 13
1. Place the hinge into the slots on the front of the HP NetServer at the left
front edge as shown in Figure 13-11.
The two hooks on the rear of the hinge must fit into the two matching holes
on the front of the HP NetServer. The hooks attach the hinge to the HP
NetServer, but not securely.
1. Place hinge against
front of NetServer,
inserting hooks into
matching holes as shown.
Figure 13-11. Pressing the Bezel Hinge onto the Front of the HP NetServer
2. Swing the hinge to the left, to bring it against the front of the HP
NetServer. See Figure 13-11.
162
Alternative Rack Mounting
2. Swing to left
to bring it against
front of NetServer