HP D5970A - NetServer - LCII Installation Manual page 30

Chapter 2
1. To select FW Info from the Main Menu, press the Enter button.
A display similar to the one shown below appears on the HP NetServers
front panel display.
**FW Info***
BMC ver xx.xx
2. Use the front panel's down-arrow button to scroll down through the rest of
the information.
A full window of the display would appear as shown below.
**FW Info***
BMC ver xx.xx
PSC ver xx.xx
RCC ver xx.xx
PBAY ver xx.xx
FPC ver xx.xx
BIOS version....
ASPN1.86L.0001.
SAPR1.86L.xxxx.Pxx.YYMMDDHHMM
NOTE
If the HP NetServer cannot detect one of the components in
this menu -- for example, the TopTools Remote Control card
(RCC) -- the word "absent" appears next to the component in
place of a version number.
Table 2-6. Abbreviations Used in FW Info Menu
Abbreviation
BMC Baseboard Management Controller (on I/O baseboard)
PSC Power Share Controller (on front panel board)
RCC HP TopTools Remote Control Card
PBAY Peripheral Bay (module which holds all internal storage)
FPC Front Panel Controller (on front panel board)
LFT Left Processor Board or Left Memory Board
RGT Right Processor Board or Right Memory Board
3. Press the front panel's Escape button to return to the Main Menu.
22
Controls, Indicators, and Ports
Definition