Download  Print this page

System Management; Power Management Features; Erp Compliance Mode - HP Z440 Workstation Series Maintenance And Service Manual

Hide thumbs

Advertisement

2

System management

This section describes the tools and utilities that provide system management for the workstation.
Power management features on page 23
BIOS ROM on page 24
Computer Setup (F10) Utility on page 25
Desktop management on page 32

Power management features

ERP compliance mode

This computer provides ERP compliance mode capability.
When this feature is enabled, the computer shuts down to the lowest possible power state. The computer
must then be turned on with the power button. One of the effects is that "wake on LAN" is disabled.
When this feature is disabled, the computer shuts down conventionally.
Enabling ERP compliance mode
Disabling ERP compliance
mode
Topics
1.
Power on or restart the workstation and press
Setup (F10) utility.
2.
Using the arrow keys, select Advanced, then select Power Options, and then S4/S5 Maximum
Power Savings.
3.
Select Enable, and then press
4.
Select Main, and then select Save Change and Exit. Press
5.
In Windows
®
Clear the check box for Turn on fast startup (recommended). If the check box is not
available, click Change settings that are currently unavailable at the top of the window.
1.
Power on or restart the workstation and press
Setup (F10) utility.
2.
Using the arrow keys, select Advanced, then select Power Options, and then S4/S5 Maximum
Power Savings.
3.
Select Disable, and then press
4.
Select Main, and then select Save Change and Exit. Press
5.
In Windows 8, search in the Start Menu for the setting Change what the power buttons do.
Select the check box for Turn on fast startup (recommended). If the check box is not
available, click Change settings that are currently unavailable at the top of the window.
Enter
to accept the change.
8, search in the Start Menu for the setting Change what the power buttons do.
Enter
to accept the change.
F10
during startup to launch the Computer
Enter
to accept the change.
F10
during startup to launch the Computer
Enter
to accept the change.
Power management features
23

Advertisement

Table of Contents

   Also See for HP Z440 Workstation Series

   Related Manuals for HP Z440 Workstation Series

This manual is also suitable for:

Z640 seriesZ840 series

Comments to this Manuals

Symbols: 0
Latest comments: