System Management; Power Management Features; Erp Compliance Mode - HP Z1 G3 Maintenance And Service Manual

2

System management

This section describes the tools and utilities that provide system management for the workstation.
Power management features on page 10
BIOS ROM on page 11
Computer Setup (F10) Utilities on page 11
Desktop management on page 22

Power management features

ERP compliance mode

This computer provides ERP compliance mode capability.
When this feature is enabled, the computer shuts down to the lowest possible power state.
When this feature is disabled, the computer shuts down conventionally.
Item
Enabling ERP
compliance
mode
Disabling ERP
compliance
mode
10 Chapter 2 System management
Topics
Description
1. Power on or restart the workstation and press
2. Disable Wake-on LAN.
Using the arrow keys, select Advanced, and then Power Management Options.
3.
4. Select S5 Maximum Power Savings.
5. Select Exit, and then select Save Changes and Exit.
6. If using Windows 10, boot to Windows and search in the Start Menu for the setting Change what the power
buttons do. Uncheck Turn on fast startup (recommended). If the checkbox is not available, select Change
settings that are currently unavailable at the top of the window.
1. Power on or restart the workstation and press
Enable Wake-on LAN.
2.
3. Using the arrow keys, select Advanced, and then Power Management Options.
4. Select S5 Maximum Power Savings.
5. Select Exit, and then select Save Changes and Exit.
6. If using Windows 10, boot to Windows and search in the Start Menu for the setting Change what the power
buttons do. Check Turn on fast startup (recommended). If the check box is not available, select Change
settings that are currently unavailable at the top of the window.
F10 during startup to launch the Computer Setup (F10) utility.
F10 during startup to launch the Computer Setup (F10) utility.