Redrive Belt Routing - Lexmark C752 Service Manual

Redrive belt routing

If the redrive belt has been removed, use the diagram and information to properly route the belt. The idler gear
roller in these photos is only visible because the printer has been disassembled to the frame. The gear will have
to be located by feel to ensure proper installation.
•
Redrive gear (A) and auto tension gear (B) properly routed.
•
Redrive belt properly routed on the idler gear (C) and the roller (D).
•
Redrive belt properly routed on the vacuum transfer belt (VTB) gear (E).
5060-2XX
Appendix A—Service tips
A-5