Lexmark C752 Service Manual page 73

User primary User secondary
message message
80 Fuser
Maintenance
81 Engine Code CRC
Failure
82 Waste Toner
Bottle Full
82 Waste Toner
Bottle Missing
82 Waste Bottle
Nearly Full
83 ITU
Maintenance
84 Replace
Oiler
84 Oiler Nearly
Exhausted
85 ITU
Maintenance
86 ITU
Maintenance
87 Fuser Missing
Explanation
This messages displays when the printer requires
replacement of a worn assembly. The message is
independently posted when a fuser needs to be replaced.
Press Go to clear this message. See
maintenance" on page 6-4
maintenance kit.
This message is displayed when microcode programmed
into the engine flash code fails a CRC check.
Press Go to clear the message.
The code data is discarded and must be resent from the
host computer.
This message is displayed when the waste container is full.
Replace the waste container and press Go.
This message is displayed when the waste container is
missing.
Insert the waste container and press Go.
This message is displayed when the waste container is
nearly full.
Press Go
Nearly Full appears in the Supplies Menu.
This message displays when the ITU reaches end of life. It
is recommended the customer order the maintenance kit.
See "Scheduled maintenance" on page 6-4
number of the maintenance kit. You can press Go to
continue, however, the message persists until replacement.
This message is displayed when the web oiler is exhausted
or missing. Replace the web oiler. See
maintenance" on page 6-4
oiler fuser replacement kit.
This message is displayed when the web oiler is nearly
exhausted. Press Go to continue to clear this message.
If 84 Oiler Nearly Exhausted message does not clear after a
new web oiler has been installed, replace parts in the
following order:
• Fuser web oiler drive motor assembly
• Fuser web oiler card.
Check printouts for excess toner. If present, replace the
suspect cartridge. Otherwise, replace the
on page 4-40. Press Go to continue, however, the message
persists until replacement.
This message displays when the ITU reaches end of life.
Check printouts for excess toner. If present, replace the
suspect cartridge. Otherwise, Replace the
on page 4-40. Press Go to continue, however, the message
persists until replacement.
This message is displayed when the engine detects the
fuser is missing.
Turn the printer off and insert the fuser assembly.
5060-2XX
"Scheduled
for the part number of the
for the part
"Scheduled
for the part number of the web
"ITU assembly"
"ITU assembly"
Diagnostic information
2-39