Lexmark C752 Service Manual page 44

5060-2XX
Error code
113 Printhead Error
114 Printhead Error
115 Printhead Error
116 Printhead Error
2-10
Service Manual
Action
No first Hysnc - black
Check for the correct installation of all the cables to the system board and
in the printhead assembly; J12 and J13 on the system board. Go to
"System board" on page
to "Printhead diagnostics" on page
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
A black printhead servo error has been detected.
Verify all packing material have been removed from the printer. Check at
the top of the printhead for the cardboard or plastic packaging.
If error persists, see "Printhead diagnostics" on page
A cyan printhead servo error has been detected.
Verify all packing material have been removed from the printer. Check at
the top of the printhead for the cardboard or plastic packaging.
If error persists, see "Printhead diagnostics" on page
A magenta printhead servo error has been detected.
Verify all packing material have been removed from the printer. Check at
the top of the printhead for the cardboard or plastic packaging.
If error persists, see "Printhead diagnostics" on page 3-1
5-8. If the cables are connected correctly, go
3-1.
3-1.
3-1.
3-1.