Paper Jam—Options And Multipurpose Feeder; Duplex Option - Lexmark C752 Service Manual

5060-2XX
200 Paper Jam—Options and multipurpose feeder
500-sheet option or envelope option
Step Action and questions
1 Does media feed correctly from Tray 1?
2 Check the tray 2 for proper media loading. Media
should be fanned before loading and must lay flat in
the tray.
Is the media loaded properly?
3 Check tray 1 pass through for damage or obstructions.
Note: Remove the paper drawer to inspect tray 1 pass
through.
Is the pass through damaged or obstructed?
4 Remove duplex and check the pass through.
• Check the alignment pin on top of the 500-sheet
option
• Check the pass through roller drive system on top
of tray 2
• Check the pass through the roller drive system on
the bottom of the duplex option.
Multipurpose feeder
Step Action and questions
1 Does the media feed correctly from tray 1?
2 Verify that the media is loaded properly in the
multipurpose feeder.
Is the media properly loaded?

Duplex option

Step Action and questions
1 Does the media feed correctly from tray 1?
2
Does the media feed correctly from the 500-sheet
options, if installed?
Check tray 1 pass through for damage or obstruction.
3
Is the pass through obstructed or damaged?
2-68
Service Manual
Yes No
Go to step 2 Go to
Paper Jam—
Tray 1" on
page 2-65
Go to step 3 Load media
properly.
Remove Go to step 4
obstruction or
replace damaged
parts.
Replace the
duplex option or
500-sheet option
as needed.
Yes No
Go to step 2 Go to
Paper Jam—
Tray 1" on
page
Replace the Properly load the
"Friction media.
buckler" on
page 4-31.
Yes No
Go to step 2 Go to
Paper Jam—
Tray 1" on
page
Go to step 3 Go to
option or
envelope
option" on
page 2-68
Clear the Replace the
obstruction. duplex option.
"200
"200
2-65.
"200
2-65.
"500-sheet